"The Flux is in the Flame"
 

The Gasflux® Process utilizes equipment to dispense Liquid Gasflux® with the fuel gas. The Gasfluxer® consists of a mixing chamber and a reserve tank for flux storage. The unit can be easily added to any existing manual or automatic brazing installation and does not require special torches, tips or unusual connections.

The Gasflux Company manufactures a series of Gasfluxer® for specific manual torch operation or automatic brazing machinery. All Gasfluxers® have a valve adjustment to regulate the amount of Gasflux® introduced into the flame. The units listed below are our “base” Models and additional features can be added to suit one’s particular brazing application. Please consult with The Gasflux Company for any added features to the base Models.

Gasflux® is a registered tradename, and is to be used exclusively with Gasfluxer® dispensing equipment manufactured by The Gasflux Company.

Unit of Measure

Specifications

Fuel Gas Type

N/A All fuel gases except acetylene

Manual/Automatic Brazing

N/A Both

Number of Torches for Manual Brazing

N/A 2 to 8 Manual Torches

Automatic Brazing Application

N/A Yes - Multiple gasfluxers may be required depending on the number of burners

Working Capacity

N/A 120 ft³/h

Maximum Fuel Gas Pressure

N/A 15 psig

Reserve Tank Capacity

N/A 5 gal

Fluxer Empty Weight

N/A 78 lb

Fluxer Height

N/A 33 in

Diameter

N/A 10 in

Thread Size

N/A 0.75 in

Connection Type

N/A Female NPT

100% Bypass Capability

N/A Yes

Manual Brazing Application

N/A 1

Industry Standards/Certifications

N/A UL

Additional Information

Additional Information

N/A Fuel gas is piped to the Gasfluxer® mixing chamber and allowed to bubble through the liquid Gasflux®. This mixture of Gasflux® vapor and fuel gas is carried to the torch at the work station. A bright green flame indicates the flux is in the flame.

A needle valve adjustment on the Gasfluxer® regulates precise control of the Gasflux®/Fuel mixture carried to the torch by directing all or only part of the fuel gas into the Gasfluxer® mixing chamber. Once the valve is set for the specific amount of flux needed, no further adjustments are required.

All Gasfluxers® can be easily maintained, regulated, and refilled by one operator.

The Gasflux® Process utilizes equipment to dispense Liquid Gasfluxer® with the fuel gas. The Gasfluxer® consists of a mixing chamber and a reserve tank for flux storage. The unit can be easily added to any existing manual or automatic brazing installation and does not require special torches, tips or unusual connections.

The Gasflux® Company manufactures a series of Gasfluxer® for specific manual torch operation or automatic brazing machinery. All Gasfluxers® have a valve adjustment to regulate the amount of Gasflux® introduced into the flame.

Additional Features

Gasfluxer® - Piping System

N/A
  • Capture/Prevent overfilling of the liquid Gasflux® in the lines
  • No immediate corrective action
  • On a stand/skid mounted for easy transport
  • Comes ready to install

Hi-Lo Sensor Gasfluxer® Features

Hi-Lo Sensor Gasfluxer® Features

N/A
  • Intrinsically Safe/Encapsulated/Fiber Optic
  • Visual alarm activated when Gasflux® level is too high or low
  • Can be integrated with most auto-braze machinery
  • Can only be used with the Model 'L' Gafluxer®

PTFE Coating aka "Stonecote®"

PTFE Coating aka "Stonecote®"

N/A
  • Easy cleaning/maintenance
  • Less solids build-up
  • Just wipe and rinse/no steel wool

Note

Note

N/A Please contact The Gasflux® Company for additional information and pricing.

Gasflux® is a registered tradename, and is to be used exclusively with dispensing equipment manufactured by The Gasflux® Company.
www.gasflux.com